esgeSparc series

For die-sinking EDM, the requirements for an efficient dielectric are the following: top machining speed, best surface results, optimum dielectric strength, minimum electrode wear, neutral odour as well as low contents of aromatics and not hazardous to health. Expert knowledge is particularly required in this context to achieve more ignitions per unit and, consequently, shorter erosion times.
esgemo dielectrics provide highest efficiency for die-sinking EDM, from roughing to super-finishing. They are produced using a synthetic base and are physiologically safe. Their chipping volume is very high in all applications. They are equally suitable for copper and graphite electrodes and have a low-wear effect onto the electrodes.
Dielectric for die-sinking EDM
» esgeSparc SE 105 and esgeSparc SE 108
esgeSparc SE 105
Dielectric for die-sinking EDM

Application

esgeSparc SE 105 is a low odor, aromatic free, intensively removing dielectric for universal use, for the roughing as well as for the finishing. It is characterized by excellent flushing action – particularly in the narrow spark gap and high oxidation stability. The high flash point ensures esgeSparc SE 105 best job security. It is well tolerated by the skin, has a good settling and low evaporation and evaporation properties.

esgeSparc SE 105 is therefore the modern requirements of the new die-sinking EDM technologies fully compliant.

Technical Data Unit Method of Testing
Kin. viscosity at 40°C mm²/s 2,5 DIN 51 562
Kin. viscosity at 20°C mm²/s 3,7 DIN 51 562
Density 15°C g/ml 0,81 DIN 51 757
Flash Point PM °C 105 DIN EN 22719
Colour L 0,5 DIN ISO 2049
Boiling range °C about 240 to 265 ASTM D 1160

All values are approximate values.

Dielectric esgeSparc SE 105 meets and exceeds the requirements of the major manufacturer of sinking -EDM machines:
AGIECHARMILLES, EXERON, MAKINO, MITSUBISHI, OPS INGERSOLL, ONA, SODICK, ZIMMER & KREIM

esgeSparc SE 108

Multifunctional dielectric for sinking erosion

Application

esgeSparc SE 108 is a synthetic-based multi-functional dielectric fluid for the modern requirements of the newest sinking erosion. esgeSparc SE 108 is completely odorless and water clear. It is almost free of aromatics and particularly skin-friendly.
esgeSparc SE 108 was developed for the requirements of the mold and tool manufacturers in the field of plastics and die casting industrie. Due to its medium viscosity, esgeSparc SE 108 is ideally suited for the finishing and roughing applications. As a result, large workpieces can be produced on machines with high current ratings (› 60Amp), but also low roughness can be achieved. Due to the extremely low boiling range of only 12 ° C, esgeSparc SE 108 is a very innovative dielectric which guarantees a high removal rate while minimizing electrode wear.
esgeSparc SE 108 is waterclear to create high visibility of the machining process. Due to the high flash point, the best possible working safety is ensured. esgeSparc SE 108 can be filtered with all common filter systems.

Properties
Technical Data Method of Testing Units Values
Appearance clear, colorless
Density 15°C g/ml ASTM D4052 g/ml 0,76
Kinematic Viscosity at 20 °C ASTM D445 cSt 3,0
Flash Point (PM) ASTM D93 °C › 104
Boiling range ASTM D86 °C 233 to 245
Pour Point ASTM D 97 °C +4
Odor None
Content of aromatic hydrocarbons UV spektral. % ‹ 0,04
Skin Test negativ
All values are approximate values.

esgeSparc SE 108 meets / exceeds the requirements of the most important manufacturers of EDM machines: AGIECHARMILLES, AGEMA, EXERON, FANUC, INGERSOLL, MAKINO, MITSUBISHI, ONA, SODICK, VOLLMER, ZIMMER & KREIM

Storage

If the barrels are stored outdoors, ensure that the ambient temperature is more than 5 ° C above the pour point of the product.

Special Dielectric

esgeSparc SE 75

Application

esgeSparc SE 75 is a special dielectric fluid of low viscosity. It is been produced in a special refining process from paraffin – based hydrocarbons for the requirements of the newest erosion technologies. It is odorless, virtually aromatic-free and non-toxic.
esgeSparc SE 75 is particularly suitable for operations with high precision and high surface accuracy requirements as well as applications where high flushing and best filterability is required.
esgeSparc SE 75 is waterclear to create high visibility of the machining process. Because of the high flash point the highest possible working safety is ensured. Despite to the highest product quality viscosity, the evaporation tendency from esgeSparc SE 75 is noticeably low.
esgeSparc SE 75 is particularly suitable for Vollmer wire-cutting erosion machines (QWD) due to its low adjustet viscosity.
Properties
Technical Data Method of Testing Units Values
Appearance clear, colorless
Density 15°C ASTM D4052 g/ml 750
Kinematic Viscosity at 20 °C ASTM D445 cSt 1,8
Flash Point (PM) ASTM D93 °C 74
Boiling range ASTM D86 °C 186 to 228
Pour Point ASTM D 97 °C -10
Odor Odorless
Content of aromatic hydrocarbons UV spektral. % ‹0,1
All values are approximate values.

esgeSparc SE 75 fulfills / exceeds the requirements of the most important manufacturers of die-sinking erosion EDM (Electrical Discharging Machining): AGIECHARMILLES, AGEMA, EXERON, FANUC, INGERSOLL, MAKINO, MITSUBISHI, ONA, SODICK, VOLLMER, ZIMMER & KREIM

Lagerung

Versichern Sie sich, wenn die Fässer im Freien gelagert werden, dass die Umgebungstemperatur mehr als 5°C über dem Stockpunkt des Produkts ist.

special multifunctional EDM fluid “high performance”

esgeSparc EGR 130

Description
esgeSparc EGR 130 is an innovative hydrocarbon fluid based on a new technology for the spark erosion of diamond tools and / or carbide tools with diamond grinding wheels. One product for two different manufacturing processes.
esgeSparc EGR 130 is a paraffinic base oil, produced in a sophisticated refining process. It is characterized by a narrow boiling range and has a very low content of aromatics.
esgeSparc EGR 130 is neutral in smell and color; foaming is extremely low.
Features and benefits
Due to its innovative formulation and special additives esgeSparc EGR 130 has the following advantages:
Only one product is required for two process technologies on the same machine tool, spark erosion of polycrystalline diamond and abrasive grinding of carbide tools
low electrode wear on copper as well as graphite electrodes
very good rinsing properties in the erosion zone
very good cooling during the grinding process, no odor
very good lubricating properties during the grinding process
Enrichment of cobalt ions during carbide processing is prevented
Best filterability, long economic service life of the filter units are possible
Minimized risk to health

Application

Ideal for the new multifunction grinding machines e.g. ANKA, Ewag, Lach Diamant, Vollmer und WALTER Maschinenbau GmbH

Technical Data Values Density at 15°C 0,82
Flash Point (PM) ›150
Viskosity at 40 °C 7,9
Initial Boiling Point 290
Final Boiling Point 350
Color ‹ 0,5
Odor odorless
All values are approximate values.
Safety and storage

The EDM fluid esgeSparc EGR 130 is not dangerous when used as intended. Nevertheless, it is recommended, that even with a product with such low smoke development, the resulting vapors should be extracted. Store casks under roof, if stored outdoors, keep the barrels lying horizontally, so that the ingress of water can be avoided. Even the smallest amounts permanently change the dielectric strength and the electrical discharge process.

EDM fluid for fast hole drilling machines

esgeSparc SE 60

Application

esgeSparc SE 60 is a special dielectric fluid of low viscosity. It is odorless, virtually aromatic-free and non-toxic.
esgeSparc SE 60 is particularly suitable for operations with high precision and high surface accuracy as well as applications where high flushing and best filterability is required.
esgeSparc SE 60 is water-clear to create high visibility of the machining process.
esgeSparc SE 60 is particularly suitable for use on AGEMA sparc erosion drilling machines because of its low adjusted viscosity.
Technical data
Technical Data Test method Units Values
Appearance clear, colorless
Density at 15 °C ASTM D4052 g/ml 760
kinematic Viscosity at 20 °C ASTM D445 cSt 1,7
Flash Point (PM) °C ASTM D93 °C 58
Odor None
Content of aromatic hydrocarbons UV spektral. % ‹ 0,1
All values are approximate values.
esgeSparc SE 60 meets / exceeds the requirements of the most important manufacturers of EDM machines: AGIECHARMILLES, AGEMA, EXERON, FANUC, INGERSOLL, MAKINO, MITSUBISHI, ONA, SODICK, ZIMMER & KREIM